The AN-16/i-M Mic Input Module allows microphone-level signals to be used with the AN-Series Distributed Audio Network products to create digital snakes, as well as with the Pro16 Monitor Mixing System.

Features

• Sixteen high quality mic preamplifiers, with 24-bit A-to-D converters
• XLR mic or 1/4-inch TRS balanced line-level inputs on combo jacks
• 48-volt phantom power on each channel, with LED
• Three-segment level LED indicators
• Continuously variable gain knob
• Phase switch per channel
• Rumble filter switch (85Hz rolloff) on each channel
• Stereo Channel Link switch per pair of channels
• Built-in mic splitter
• Balanced insert send and return jacks (1/4-inch TRS)
• Dual A-Net outputs allow the A-Net data to be sent to two destinations
• A-Net Expansion for use with other AN-Series distributed audio network products
• Internal universal power supply; IEC power connector

The AN-16/i-M Input Module is a 3U-high rack-mounted mic- and line-level input device. The AN-16/i-M contains sixteen high-quality microphone preamps with 24-bit A-to-D converters. Each channel contains a three-segment level LED meter, a continuously variable gain knob, a phase reverse switch, a 48-volt phantom power switch with LED, and a rumble filter with an 85Hz rolloff. In addition, each pair of channels has a Stereo Link switch that allows stereo operation when connected to a Pro16 Monitor Mixing System.

The rear panel of the AN-16/i-M Input Module contains a host of professional connectivity features. Each channel has a combo jack that can accept either XLR mic or 1/4-inch line-level (balanced or unbalanced) inputs. Sixteen passive mic Thru connectors create a built-in microphone splitter. Balanced insert points with separate 1/4-inch Send and Return jacks allow easy interfacing with external processing devices. The sixteen insert Sends can also be used as a set of post-gain direct audio outputs. The AN-16/i-M Input Module uses an internal power supply with a standard IEC power connector.

Two parallel A-Net outputs allow the AN-16/i-M Input Module to send A-Net data to multiple destinations, allowing for simultaneous patching to a monitor console and a front-of-house console. Both A-Net outputs feature heavy duty Neutrik EtherCon combo RJ45 connectors. A separate A-Net Expansion jack allows the AN-16/i-M to be used in combination with other AN-Series products and to transfer up to thirty-two channels of audio over a single standard Cat-5 cable.

The AN-16/i-M Input Module is fully compatible with all Pro16 Monitor Mixing Systems and AN-Series products. As with all Aviom A-Net compatible products, cable runs of up to 500 feet (150 meters) are possible between devices.