|
The d&b D6 amplifier is the smaller brother to the flagship D12. It is based on the solid and reliable D12 technology.
The D6 fills the need for a light, highly efficient amplifier that is designed to deliver medium power into impedance loads between 4 and 16 ohms. The dual channel Class D amplifier section offers increased efficiency compared to conventional designs and, weighing in at only 8 kg (17.6 lb), this 19" 2 RU amplifier is really easy to handle.
 |
 |
The D6 offers, via digital signal processing, built-in configurations for d&b's whole loudspeaker range (with the exception of the B2-SUB and 2-Way Active loudspeakers) as well as sophisticated protection. |
Each channel offers 600 W into 4 ohms (350 W into 8 ohms). All settings, including delay (from 0.3 to 340 ms in 0.1 ms increments) and equalisation (4-band optional parametric or notch), can be accessed and controlled via the front panel mounted rotary encoder and Liquid Crystal Display or through the d&b Remote network.
The D6 also features System check to ensure operation is within a predefined condition and Input and Load monitoring for applications compliant with IEC 60849 "Sound systems for emergency purposes".
The switch mode power supply adapts automatically to mains voltages (100 V, 115 V, 200 V, 230 V, 50 – 60 Hz). The new D6 is equipped with analog and AES / EBU inputs and links with digital elements constructed to achieve audio performance that meets or exceeds that of analog devices.
In 4 ohm mode the D6 amplifier allows multiple loudspeakers to be driven at higher SPLs.
| D6 Data (linear setting with subsonic filter) |
| Rated output power (THD+N < 0.1%) |
2 x 350 W into 8 O, both channels are driven |
|
2 x 600 W into 4 O, both channels are driven |
| S/N ratio (unweighted, RMS) |
> 110 dBr |
| D6 Connectors |
| INPUT/LINK ANALOG A/B |
3 pin XLR female/male |
| INPUT/LINK DIGITAL AES/EBU |
3 pin XLR female/male |
| Sampling rate |
48 kHz / 96 kHz |
| OUT CHANNEL A/B |
NL4 |
| REMOTE |
2 x RJ 45 parallel |
| SERVICE |
USB Type B |
| D6 Digital Signal Processing |
| Sampling rate |
96 kHz / 27 Bit ADC / 24 Bit DAC |
| Basic delay / latency analog input |
0.3 ms |
D6 Power supply |
| Autosensing switch mode power supply |
100/115/200/230V, 50 - 60 Hz |
| Mains connector |
PowerCon® |
| D6 Remote network |
| Remote network |
CAN-Bus |
| D6 Dimensions, weight |
| Height x width x depth |
2 RU x 19" x 353 mm / 13.9" |
| Weight |
8 kg / 17.6 lb |
|
GEARPLUS ~ news ~ companies ~ products ~ gags ~ articles ~ who we are ~ subscribe ~ unsubscribe ~ you tube 
